| Customization: | Available |
|---|---|
| Warranty: | 2 Years |
| Control Type: | PLC |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hot and cold feed rubber extruder/ extrusion machine / rubber machine
1 The machine is equipped with inner tube and tire tread extrusion heads ,and can also be equipped with
other extrusion heads as required by users.
2 A machine body temperature measuring and indicating device is installed.The feeding zone over 150 is
equipped with side rolls for the enhancement of feeding capability.
3 The screws and bushes are subjected to nitrogenation treatment to get enough strength and wear-resistance.
4 The reducer has a forced lubrication unti,which is featured by high transmission efficiency,long service life
and low noise.
5 The machine over 150 is driven by a variable-speed motor.
6 The side rolls are designed as side-open type for easy rubber removal
Technical parameters:
|
Model |
XJ-65 |
XJ-115 |
XJ-150 |
XJ-200 |
XJ-250 |
|
Forms of screw and screw thread |
Double-head equal-depth convergent type |
Double-head convergent type |
Double-head unequal-depth |
Double-head convergent type |
Double-head convergent type |
|
Screw diameter (mm) |
65mm |
115mm |
150mm |
200mm |
250mm |
|
L-D ratio |
4 |
4.8 |
4.4 |
4.4 |
4.5 |
|
Screw rotational speed (r/min) |
20,27,35,47 |
20,33,46,60 |
27-81 |
22.4-67.2 |
20-59 |
|
Motor power (kw) |
7.5 |
22 |
13.3-40 |
25-75 |
33-100 |
|
Production capacity (kg/h) |
50-80 |
100-420 |
800 |
1500-2200 |
2000-3200 |
|
Size (L×W×H) (mm) |
1600×675×1208 |
2300×800×1370 |
3585×814×1470 |
4549×1140×1750 |
|
|
Weight (kg) |
1500 |
3300 |
4500 |
7200 |
11400 |
Pictures of machine:
*Structure introduction:
The machine is composed of head, frame, pedestal,pipeline,lubricating system and electrical control system.
Screw is made of 38CrMoALA, the reducer transfers drive through the motor, and screw speed can't be adjusted. In order to heating or cooling screw, screw is hollow, add steam or cooling water through the rotated joint.
Screw is a dicephalous isometry screw thread, and screw thread is wearable owing to the surface of screw thread is heating nitrous treatment. Screw works when the frame is in pressure, and the axial drive is supported by thrust roller axletree in thrust axletree bedplate ..
There is a hollow interlayer inside the frame, and it is convince in heating and cooling. In front of the frame, there are some bushes installed. According to abrasion degree of the bushes, we can exchange some new bushes. The clearance between screw and frame measured in diameter should be 0.330-0.447mm, it will affect the normal operation if less than 0.330-0.447mm , it will reduce capacity if more than 0.330-0.447mm.
Our company is a firm engaged in production enterprise, mechanism of rubber has more than 20 years of history.
Companies depend on the technical power, the strict scientific management expertise, product quality and good service, and won the majority of the customer's trust. many of the product is exported to the united states, canada, australia and india, indonesia and uzbekistan, etc.
Company management certification: ISO 9001:2000, ISO 17799, ISO 9001:2008, ISO 14001:2004, ISO/TS 16949
Our main products are plate vulcanizing press, two-roll mixing mill, rubber extruder, banbury intensive kneader, bale cutter, conveyer belt vulcanizing press, tyre reclaiming machines, rubber refiner, rubber cracker, etc. we especially specialize in the design and manufacture of the nonstandard products
♥One year guarantee for whole machines
♥24 hours technical support by email
♥Calling or door - to -door service.
♥Provide videos for each machine.
Warmly welcome our factory to visit,if you are interested,please dont hesitate to contact me or leave an inquiry!
){kind=link}